top of page
OUR LATEST WORK

Proud To Serve You

EPOXY FLOOR COATING

ASIAN TERMINAL INC.-BATANGAS CITY MULTI-

LEVEL PARKING(64,000 sq.m.)

Car parks meet various challenges with their floorings. The car park floors will require being able to safeguard the surface from abrasion and damage. Moreover in the case of multi-story car parks also needs to act as waterproofing in-between layers.

 

Yet, its difficult tasks do not stop here: System specified for such areas will need to be resistant to hot tires and car emissions. As well as occasional spillages from brake fluids, oils, and other chemicals. All these factors need to be taken into account when designing the right car park floor.

Some areas of the car park flooring  require applying anti-slip protection.(ie.Pedestrian lane and ramps)

EPOXY FLOOR COATING

OKADA MANILA VIP CARPARK (20,000 sq.m.)

Okada Manila is a hotel and casino spot ideally located close to NAIA International Airport, has now got a newly developed underground parking facility that can accommodate thousands of  cars at a time. Due to it being one of the top tourist destination in Manila it was clear that  was on the rise and the need of a car parking infrastructure

TORCH MEMBRANE

WATERPROOFING

ASIAN TERMINAL INC.-BATANGAS CITY ROOFDECK, MULTI-

LEVEL PARKING (16,000 sq.m.)

Read More

ATI’s Batangas Port (Phase 1) is the top domestic port in the country in terms of passenger volume and serves as the primary springboard for commodities between mainland Luzon, the Mimaropa (Mindoro, Marinduque, Romblon and Palawan) region and other nearby Visayas island destinations.

 

Annually, Batangas Port handles over three million outbound passengers and facilitates the transit of over 200,000 vehicles via high-speed inter-island ferries and Roll-on/Roll-off vessels plying the Luzon-Visayas interisland routes. Given its location, the port also serves as a strategic staging ground for domestic containerized trade between Luzon, Visayas and Mindanao.

 

Aside from domestic operations, Batangas Port extends its expertise in handling international general cargoes. Utilizing two foreign multipurpose berths, Batangas Port facilitates efficient handling of general, bulk and break-bulk cargoes such as high density rocks, steel, lumber, completely built units (CBUs) and other bagged and project cargoes.

download (2).jpg

VARIOUS WATERPROOFING APPLICATION

Power Plant Mall Expansion Project

This is a shining example of how our service has evolved to the high standard we currently hold ourselves to. It really highlighted our collective work ethic, and the adjustments we can make in order to accommodate a client. Nothing is too much for us to handle, or too small to push aside.

PEARL PLAZA

Tambo, Paranaque City

TORCH MEMBRANE WATERPROOFING(5,000sq.m.)

  • Facebook - White Circle
  • LinkedIn - White Circle
  • Twitter - White Circle

TORCH MEMBRANE WATERPROOFING

GREENHILLS MULTI-LEVEL PARKING P1-B & P6(8,000 sq.m.)

Torch On Membranes is a polymer modified membranes used as Bituminous Waterproofing for substructures and roofs. TOM’s are manufactured out of a mixture of bitumen and different polymers like APP (Atactic Poly Propylene) or SBS (Styrene Butadiene Styrene) to influence cold temperature performance, elongation etc. and are coated onto a dimension stable reinforcement (Polyester or Glassfibre) to influence mechanical properties like tear-strength, puncture resistance, etc

CAR PARK PAINTING (9,589 sq.m.)

Triumph Building

This is a great example of the kind of service our clients have come to expect from Zumicon Coating & Waterproofing. Nothing matters more than our clients, and when they hire us for the second, or third (or tenth) time, we know we’re doing something right. When people know they can rely on our professional service, that’s when great business relationships are formed.

EVM CONVENTION CENTER

VARIOUS WATERPROOFING SYSTEM

"EVM Convention Center is being erected at Central Avenue, Quezon City. The Convention Center has 6 levels; Basement as a museum and gallery, Ground Floor as receiving area and function hall, 2nd and 3rd floor as an auditorium (1182 seats), and 4th and 5th floor as a conference hall(1200 seats-main, 690 seats-balcony). This is a modern architecture has escalators and elevators."

-INFINITRX45

PROSCENIUM at ROCKWELL

INTERIOR PAINTING

A sophisticated lifestyle is an everyday fact at the Proscenium. It features a community of 5 towers not far from the city, but far removed from the stress city life brings. With a performing arts center, retail shops, open spaces and state-of-the-art amenities, the Proscenium is an exclusive luxury address for the new generation of Rockwell residents.

ETON CENTRIS

STATION MALL

ROOF PAINTING AND WATERPROOFING

(14,000 sq.m.)

Eton Centris was announced in October 2008 as Eton's second major mixed-use development township project, after the 1,000 hectares (2,500 acres) Eton City in Santa Rosa, Laguna.[1] In total, the development was planned to have seven office buildings and ten high-end residential condominiums.[2] Eton developed Centris Station and Centris Walk simultaneously with two other projects: Eton Corinthian (also in Quezon City) and Green Podium(near De La Salle University); the expected total annual revenue from the three projects was ₱300 million, with a projected 60 to 70% occupancy rate at opening.[3][4]

Eton Centris was originally being developed by Paramount Land Equities, another Lucio Tan-controlled company. In 2009, Eton Properties purchased the Centris development from Paramount in exchange for 1.6 billion newly issued Eton Properties shares.

TAKATA PHILS.

LAGUNA TECHNOPARK INC.,

STA. ROSA, LAGUNA

EPOXY FLOOR COATING (5,000 sq.m.)

Takata (Philippines) Corporation manufactures automotive safety products and components, specifically fabrics for car air bags and seatbelts, air bag cushions, and various assemblies. The company was founded in 1997 and is based in Laguna Technopark, Philippines. great business relationships are formed.Takata Plant 1 and 3 :  16,194 sq.ft. production floor needs to be refurbished within 4-5 day plant shutdown.The scope of specification was an epoxy coating system with 3 coats system smooth finish for the production floor areas which would be hardwearing, abrasion resistant and aesthetically good.Zumicon proposed the whole system of  Sealbond EFC 80 with the primer, crack filler : (1 coat Eposeal 100lv primer with 2 coats of EFC 80 as topcoat)Client and consultant were delighted by the quality of work and on time delivery.

PEPSI Bottling Plant

SAN FDO. PAMPANGA

PU MORTAR FLOORING (726 sq.m.)

Polyurethane Mortar System is a self leveling, low odor slurry that can be applied at 3/16" thickness and broadcast to a yield of 1/4" to 3/8" system. It is used for environments requiring a durable floor that can withstand heavy and abusive service.

PANASONIC MFG.

PHILS. INC

ORTIGAS AVE. EXTENSION, TAYTAY, RIZAL

ROOF REHABILITATION AND LEAKPROOFING (4,560 sq.m.)

Zumicon went to work by power  washing roof and utilize wire brushing, as needed, to bring to tight rust finish. Before proceeding, the roof was free of dirt, debris and completely dry. Prep the surface area including sealing fasteners and  horizontal & vertical seams along with penetrations.using Hyperseal LM25,: Once prep was completed, Sealbond Anti-Corrosive primer coat  and Bondflex Acrylic Waterproofing paint as Topcoat were applied . Upon completion, the finished roof was thoroughly inspected by Zumicon and approved by Facilities and Engineering  management of PMPC.

DR. YANGA'S HOSPITAL

BOCAUE, BULACAN

EXTERIOR WATERPROOFING, WET AREAS AND ROOFDECK WATERPROOFING

UP GENOME CENTER

UP DILIMAN, Q.C.

ROOFDECK WATERPROOFING

The Philippine Genome Center (PGC), a genomics-focused multidisciplinary research unit of the University of the Philippines (System) under the Office of the Vice President of Academic Affairs is located at the PGC Building, A. Maria Regidor Street, National Science Complex, University of the Philippines, Diliman, Quezon City. In fulfilling its mandates, the PGC welcomes collaborations on research, capacity building, and institutional linkages for the development of genome-based applications.

MAKATI MEDICAL CENTER

EXTERIOR WALL  AND ROOF DECK WATERPROOFING

Makati Medical Center, also known as Makati Med, or MMC (stylized as MM+C), and formerly known as Makati General Hospital, is a tertiary hospital in MakatiMetro Manilathe Philippines with more than 600 beds. The hospital was founded on May 31, 1969.[1] It is one of the hospitals owned and operated by Medical Doctors Inc., a subsidiary of Metro Pacific Investments Corporation.

Case Study: Project
bottom of page